Buy WiFi Range Extender Online | Range Extender | Australia
WiFi Range Extender
A WiFi range extender could be the solution for you if you are having trouble getting a solid WiFi signal in some parts of your home.Â
A WiFi extender or repeater is used to extend the coverage of your WiFi network. It works by receiving your existing WiFi signal, then amplifies the signal and then transmitting the boosted signal. Using a WiFi range extender, you can effectively double the WiFi network coverage to reach the far corners of your home or office and even extend the coverage to your yard.
What Does WiFi Range Extender Mean?
The WiFi range extender is a device located between a base router or wireless local area network (LAN) access point and a computer or client device that is out of signal range or blocked by a signal barrier. The extender acts as a wireless repeater or relay by receiving signals from the access point, and these signals are retransmitted to the client.
The range extender connects to the access point or router wirelessly, receives the signal and retransmits it. The transmission speed of the client connected through the extender is usually not equal to the direct service from the base station, and the delay of each hop will increase. For customers who can access weak signals, range extenders are more effective than customers who cannot access signals at all.
Important considerations about WiFi range extenders:
- The range extender must be within the range of the signal source and client device.Â
- If the token is encrypted, the associated encryption key is required.Â
- It has a static IP address, so it is not recognized as a client.
- This process works best if the range extender uses the same chipset and software as the basic access point or router.
Buying Tips for WiFi Extenders!
1. Dual-band mode
The data transmission speed is halved when using a WLAN repeater because the extender must communicate with the end device and the wireless access point. If the router in the 802.11n standard normally sends 300 megabits per second, there will be a maximum of 150 megabits remaining after the WLAN repeater.Â
This problem can be avoided if communication between the repeater and the router is allowed to occur on a different frequency than the receiving device and the extender. Therefore, when purchasing, please make sure that the repeater supports dual-frequency mode, also known as a cross-frequency repeater, and is valid on both 2.4GHz and 5GHz frequency bands.
2. Data transfer rate
Another important purchase criterion is the number of maximum data transfer rates: so ask yourself how many megabits per second you want to transfer. Is the standard transmission rate of 300 Mbit/s sufficient for your purposes, or can it be higher? Understand your Internet usage behaviour to find the right WiFi extender.
3. Ease of use and security
In addition to technical features, ease of use and network security also play an important role in the selection of WLAN extenders. However, you basically don’t have to worry about security: especially the newer and more innovative WLAN extenders have high encryption standards (WPA/WPA2), so they are particularly secure. In operation, the products are often similar. It’s better to be smart and compare several models to see which one attracts you the most.
Setting up a WiFi Extender: How to do it?
The easiest way to configure it is through WPS (WiFi Protected Setup) because the procedure is always the same regardless of the brand and manufacturer of the repeater. The whole process works through the integrated WPS button, which is now available on almost all modern routers and repeaters. The installation method is as follows:
- Choose a suitable socket near the router and plug in the WiFi extender.Â
- Now press and hold the WPS button on the repeater for approximately 3 to 6 seconds until the LED signal appears.Â
- Then press and hold the WPS button on the WiFi router for 3 to 6 seconds until the light signal also appears.Â
- Now the router and repeater connect automatically. This can take up to 3 minutes but is usually much faster.Â
- The WiFi repeater has been configured. Now you can find a suitable location for the amplifier.
Buy Range Extenders | Kluro | Australia
The repeater amplifies the router signal to ensure wider coverage of the indoor wireless LAN. Use when the WiFi modem is not powerful enough to reach every corner of the apartment. The space for the WLAN repeater must be carefully selected. For example, if the amplifier is too far away from the router, it will not be able to send the signal cleanly. However, once you find a good location, the repeater will give you a decisive advantage, giving you the opportunity to use a stable Internet connection anywhere in your home.